The gas struts automotive is a versatile hydro-pneumatic lifting mechanism. As a result, they can raise lower and support a heavy object in an easy manner. The springs are made in such a way that they can stand on their pressurized gas with some lubricant oil. These help them to support or oppose the range so that they can work in a smooth manner.
The struts are in commercial use because of their vehicle compartments, releasing energy in a smooth manner, and sliding position. But before that, it is important to know how it works, and their principle behind the working. Although it is widely known as gas struts, they have other names in the industry as rams, dampers. To make their lifelong, manufacturers design them in such a way that they have a gas spring compressor with a configuration that is suited for the intended use.
What are The Characteristics Of Gas Struts?
The gas struts spring rate and the size differs from one user to another. They have a beginning size of about 4-12 and it goes on up to 20-40. Gas struts automotive have its unique feature of withstanding weight level from 0.5 – 6kg. As it goes one there should a border for every commercial vehicle, they can hold weight up to 100Kg.
Commercial Use of Gas Struts
A gas struts automotive is capable of giving a fixed force, prevents damage to the piston rod and body, increase the lifespan of the vehicle, and gives an adjustable force. The best one is Stainless steel struts have suitable commercial applications. The stainless steel can withstand when they are exposed to corrosive environments. Some of the best commercial applications are microlights, aircraft, car transporters, exhibition trailers, catering vans, and even they can make through the car top carriers. Apart from this, gas struts have its usage in the field of,
- Lifting lids
- Sliding Columns
- Tensioning Devices
The gas struts automotive has typical applications for,
- Car Tailgates
- Boat Access Hatches
- Coach Luggage Doors
- Vending Kiosks
- Machine Guards
How Does Gas Springs Work?
It is better to understand the working of the gas struts automotive. All it starts with a look of a bicycle tyre pump. One has to imagine about the gas pump and their key elements similar to the manual hand pumps. All it starts with a piston where the rod mechanism passes back and forth with the help of a tight fitting tube. The spring struts have a separate sealing, having a constant gas volume. In order to maintain internal pressure balance, the struts allow a certain amount of gas to pass through the next level. To move the piston from one direction to another, there is a requirement of force in a single direction.
Different Types of Gas Springs
Though there are several varieties of struts, based on the size and use of the gas also there are many sub-categories to follow. Two of them are as follows:
- Adjustable Gas Struts – The name adjustable itself clearly depicts that they have an adjustable volume and gas pressure.
- Compression Gas Springs – The compressed gas works on the opposed has a traditional coil that is in the form of steel wire.
In a conclusion, one can see that in most of the places where there is a need for weight-bearing, there comes the existence of gas struts automotive. All one needs to know is how well they can hold the weight and which automobile needs how much weight. If one gets complete knowledge on that, then it is easy to maintain and repair.