6 Tips to Maintain the Heater After Hot Water Heater Installation

Are you done with the hot water heater installation? Congratulations! It is a well-known fact that hot water systems are essential for houses and commercial setups. In the cold winter season, people use warm water to take a bath and also to perform other different tasks. One should always check for defects in the system as wear and tear are common issues. Ignoring the problem would lead to costly mistakes, and the customers might end up in a huge financial mess. Moreover, regular maintenance is essential to deliver sterling results to the users. 

The following are the tips to maintain the hot water heater

#1 Check the Condition of The Sacrificial Anode:

As the name suggests, it is an aluminium rod located inside the hot water tank. The primary function of the component is to attract the impurities so that they do not get deposited and cause rusting in the system. It is essential to analyse the condition of the anode regularly. Over some time, the rod in the hot water heater installation might get oxidized, and the functionalities are degraded too.

If the condition of the anode is affecting the functions, it is better to replace the components with the new version. The repair work should be conducted every five years to deliver sterling results to the users.

#2 The Process of Replacement After the Hot Water Heater Installation:

If you are thinking to replace the anode on your own, it could prove to be a huge mistake. The item is attached to the electrical circuit and stands amid the steam and hot water. One of the best solutions is to hire a plumber who can impeccably accomplish the task. You should make sure that the individual is qualified and experienced enough to get the desired results.

#3 Testing the Temperature and Pressure Relief Valves:

The next step is to test the temperature and the pressure relief valves. Both are essential parts of the hot water tank as they work meticulously to release the hot water if the temperature becomes too high. It is futile to overlook the problem when the valve malfunctions because it might lead to the leakage in water droplets. Therefore, one should make sure to test the valves regularly so that the functionality of the heating system is improved.

shutterstock 514908943 scaled

#4 Replacement:

To replace the valve, you need to read the user manual carefully. However, the best way to accomplish the task is to contact the service centre who came for the hot water heater installation. The accomplished technicians are aware of the operations of the system and can identify the problem correctly. Before selecting the vendor, make sure that the individual is certified and experienced.

#5 Routine Maintenance:

One of the best ways to keep the water tank in operation is to perform regular upkeep impeccably. Many companies claim to provide top of the line services to the users; however, only a few of them can match the expectations. All you have to do is to conduct a little bit of research.

#6 Replacement of the Thermostat:

The thermostat is an integral part of the heater as it increases or decreases the temperature. In a case of any issue after you are done with the hot water heater installation, you can contact and technician within the shortest possible time frame. To drain the water supply, open the valve regularly. It would play an essential role in disseminating the water to the furnace. Once the water is drained out, you can quickly close the drain cock and vents. Regular cleaning would go a long way in maintaining the heating system and ensure that the rooms are kept warm.

Hot water heater installation is just the first task. The above points would help to provide sterling results to the user.

Leave a Reply

Your email address will not be published. Required fields are marked *